Need help?Do you have a question about the Ferrofish PULSE 16 and is the answer not in the manual?
General| Type | AD/DA Converter |
|---|---|
| Channels | 16 |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Bit Depth | 24-bit |
| Power Supply | External Power Supply |
| Analog I/O | 16 x TRS In, 16 x TRS Out |
| Wordclock I/O | 1 x BNC In, 1 x BNC Out |
| Control | Front panel buttons, MIDI |
| Form Factor | Rackmount |
| ADAT I/O | 4 x ADAT (TOSLINK) |
Detailed safety guidelines for operating the device and handling potential hazards.
Configuration of wordclock source and sample frequency settings.
Setting the sensitivity for the 16 analog inputs individually.
Adjusting the level of the 16 analog outputs individually.
Defining the signal path for inputs and outputs using a matrix.
Details on locking the front panel using a PIN and importance of saving the PIN.
Explanation of wordclock generation and reception via BNC connectors.
Technical details on ADAT, MADI, Wordclock, and MIDI interfaces, channels, and latency.
Technical details on A/D and D/A converters, gain, sensitivity, and levels.
To Next Page
