Ferrofish PULSE 16 - Technical Specifications; Digital I;O Specifications; Analog Converter and Levels

20
Technical specifications
ADAT I/O: 4 + 4 optical ports
16 channels @32kHz, 44.1kHz, 48kHz
16 channels @64kHz, 88.2kHz, 96kHz
8 channels @128kHz, 176.4kHz, 192kHz (MADI MX option required)
Latency: 2 samples
MADI I/O: SFP cage for MADI single-mode or multi-mode SFP module
(AES10) 64 channels @32kHz, 44.1kHz, 48kHz
(optional) 32 channels @64kHz, 88.2kHz, 96kHz
16 channels @128kHz, 176.4kHz, 192kHz
MIDI-over-MADI implemented
Latency: 2 samples
Wordclock: 2 x BNC: In / Out
Switchable input termination of 75 ohms
MIDI I/O: MIDI Standard 1.0 / 1996
2 x 5pin I/O port for remote control
Translation from MIDI to MIDI over MADI possible.*
A/D converter: 2 x CS5368 (Cirrus Logic)
outputs: 16 x TRS ¼” (6.3mm), female
(analog) Digital gain: +20dBu...-8dBu in single steps of 1dB
Latency: @48kHz: 12/fs, 0.25ms, @96kHz: 9/fs, 0.09ms,
@192kHz: 5/fs, 0.03ms
D/A converter: 2 x CS4365 (Cirrus Logic)
inputs: 16 x TRS ¼” (6.3mm), female
(analog) Digital sensitivity: +20dBu...-8dBu in single steps of 1dB
Latency: @48kHz: 7.8/fs, 0.16ms, @96kHz: 5.4/fs, 0.06ms,
@192kHz: 6.6/fs, 0.03ms
Op-Amps: RC4580
Display: 2 x Color-TFT Display
* MADI MX option required.