19
Remote Software
You can control your PULSE16 from a computer. To do so you can choose between the
following connection methods:
MIDI Interface
Use a MIDI interface to connect your PULSE16 to your computer. Please make sure that
the MIDI interface can transmit and receive system exclusice (sysex) data.
MIDI over MADI (MADI MX option required)
You can also use the MADI connection (MADI MX option required) with a MADI card,
which uses the MIDI-over-MADI protocol. Unfortunately not all MIDI expansion cards or
MADI devices provide this feature. If you want to use MIDI-over-MADI please make sure
that your device supports this feature. For further details please read the expansion cards
handbook or contact the manufacturer.
After starting the software program, please first select the MIDI input and output port of
the PULSE16. Then press the connect button. All connected MIDI devices will be scanned
and connected.
For further information about the remote software please visit: www.ferrofish.de
To Next Page
Loading...
