18
For creating a rock-solid clock signal, the PULSE16 uses a proprietary circuit for
jitter reduction. All data coming from MADI, ADAT and BNC is processed by this
jitter reduction stage. This guarantees the lowest jitter on all digital channels.
PULSE16 I/O‘s – MIDI
In addition to MIDI-over-MADI (see chapter MADI (MX)) the PULSE16 offers a 5pin MIDI
I/O port. This can be used for controlling the unit over MIDI or for giving-out MADI sig-
nals coming from MIDI-over-MADI data stream or embedding MIDI signals coming from
the 5pin MIDI port inside the MIDI-over-MADI data stream – which can be very handy
controlling MIDI Equipment on stage over MIDI-over-MADI from the FOH. The kind of
MIDI routing can be adjusted in the SETTINGS screen.
To Next Page
Loading...
