To Next PageTo Next PageWhat to do if Ferroli ENERGY TOP W 80 Boiler controller DBM12 fault?
If your Ferroli Boiler's controller DBM12 shows a fault, it could be due to an internal error. First, check the earth connection. If the problem persists, the controller may need to be replaced.
Why is there no communication between controller and gas valve in my Ferroli ENERGY TOP W 80?
If your Ferroli Boiler is not communicating between the controller and gas valve, it could be due to the controller not being connected or the valve being damaged. Ensure the controller is properly connected to the gas valve. If the issue continues, the valve may need replacement.
How to fix heating sensor fault in Ferroli ENERGY TOP W 80 Boiler?
If the heating sensor in your Ferroli Boiler is faulty, and it's due to the sensor being damaged, you should replace the sensor.
General| Fuel Type | Natural Gas |
|---|---|
| Ignition | Electronic |
| Heat Exchanger Material | Stainless Steel |
| Energy Efficiency Class | A |
| Mounting | Wall-mounted |
| Power Supply | 230 V, 50 Hz |
