To Next PageTo Next PageWhat to do if extraneous light strikes the photoresistance in Ferroli Burner?
If extraneous light is affecting the photoresistance in your Ferroli Burner, the solution is to eliminate the source of the extraneous light.
Why is the pipe pressure adjustment incorrect in Ferroli Burner?
If the pipe pressure adjustment is incorrect in your Ferroli Burner, it could be due to a damaged fan motor, in which case you should replace it. Alternatively, the fan might be dirty, so try cleaning it.
How to fix no ignition shutdown in Ferroli SUN P7 Burner?
If your Ferroli Burner experiences no ignition shutdown, this could be due to a dirty combustion head. If so, empty and clean it. Another cause might be a blocked pellet feed duct. In this case, free it, ensure the combustion head isn't clogged, and empty it if needed.
What to do if Ferroli Burner shows pressure transducer fault?
If you're experiencing a pressure transducer fault (disconnected) in your Ferroli Burner, it may be due to disconnected wiring. Check the wiring and replace the sensor if necessary. The issue may also be due to a damaged sensor.
Why Ferroli Burner shows boiler shell probe fault?
If you encounter a boiler shell probe fault (if enabled) in your Ferroli Burner, the wiring may be shorted. In this case, check the wiring or replace the sensor. The wiring may also be disconnected.
General
