Festo CPV14-GE-FB-8 - User Manual

Electronics manual
CPV valve terminal
with
direct connection
Type
CPV..-GE-CO2-8
Field bus protocol:
-CANopen
Manual
526 010
en 0107NH
[655694]
Compact performance

Summary

1. Installation

1.1 General instructions on installation

1.2 Setting the CPV Direct

Details fitting/removing switch module and setting DIL switches for baud rate, extension, and station number.

1.3 Connecting the field bus

Covers field bus cable, baud rate, length, connection methods (sub-D, adapters), and bus termination.

1.4 Bus termination with terminating resistors

1.5 Power supply

Covers power supply cables, unit selection, connection, and potential equalization.

2. Commissioning

2.1 Preparing the CP valve terminal for commissioning

Covers switching on power supply and assigning addresses to the CPV valve terminal.

2.2 Commissioning on a CANopen master

Details general CANopen aspects and the process of commissioning on a master.

2.4 Object directories

3. Diagnosis

3.1 Diagnosis via LEDs

Explains LED indicators for normal operation, error states of PS/MNS, and valve solenoid coil status.

3.2 Error search during bus start-up

3.3 Diagnosis via the field bus

3.4 Error treatment

3.5 Short circuit;overload

Festo CPV14-GE-FB-8 Specifications

General

Brand	Festo
Model	CPV14-GE-FB-8
Category	Terminal Block
Language	English