Need help?Do you have a question about the Festo IFB13-03 and is the answer not in the manual?
General guidelines and safety warnings for connecting the valve terminal.
Warnings and guidelines for safely switching on the power supply to the valve terminal.
Process of ascertaining configuration data and assigning addresses to valve terminals.
Steps for configuring and addressing the valve terminal using Siemens software.
How to diagnose issues directly on the valve terminal using LEDs.
How diagnostic information is reported to the automation device via PROFIBUS-DP.
How the valve terminal behaves during faults in the control system and general DP master error handling.
General guidelines and safety warnings for connecting the valve terminal.
Warnings and guidelines for safely switching on the power supply to the valve terminal.
Process of ascertaining configuration data and assigning addresses to valve terminals.
Steps for configuring and addressing the valve terminal using Siemens software.
How to diagnose issues directly on the valve terminal using LEDs.
How diagnostic information is reported to the automation device via PROFIBUS-DP.
How the valve terminal behaves during faults in the control system and general DP master error handling.
General| Number of poles | 3 |
|---|---|
| Rated voltage | 800 V |
| Rated current | 32 A |
| Protection class | IP20 |
| Nominal cross section | 4 mm² |
| Mounting type | NS 35 |
| Cross-section flexible conductor | 0.5-4 mm² |
| DIN rail mounting | NS 35/7.5, NS 35/15 |
| Operating temperature | -60 °C |
| Material housing | Polyamide |
| Material clamping unit | Steel, hardened |
| Standards | IEC 60947-7-1 |
To Next Page
