Need help?Do you have a question about the Festo CPX-AP-I and is the answer not in the manual?
Covers applicable documents, product version, labelling, and specified standards.
Details safety rules, intended use, personnel qualifications, and UL certification.
Describes the CPX-AP-I system, its function, structure, and variants.
Details interface, input/output, and electrical interface modules with their functions.
Explains LED displays for status and diagnostics, and module labelling elements.
Explains internal module communication, addressing, and data exchange.
Covers mounting distances, installation space, and direct mounting procedures.
Details power supply configurations, including logic and load supplies.
Addresses voltage drop in cables and electrical isolation between system components.
Covers functional earth, line connection safety, and cable disconnection.
Outlines checks, interface configuration, testing, and network commissioning.
Explains parameter adaptation and lists diagnostic methods like LEDs and system checks.
Details diagnostic status, message grouping, and specific diagnostic messages.
Describes load voltage monitoring and its diagnostic display.
Provides general technical data, ambient conditions, and protection ratings.
Details vibration, shock resistance, power supply, and UL certification data.
Covers applicable documents, product version, labelling, and specified standards.
Details safety rules, intended use, personnel qualifications, and UL certification.
Describes the CPX-AP-I system, its function, structure, and variants.
Details interface, input/output, and electrical interface modules with their functions.
Explains LED displays for status and diagnostics, and module labelling elements.
Explains internal module communication, addressing, and data exchange.
Covers mounting distances, installation space, and direct mounting procedures.
Details power supply configurations, including logic and load supplies.
Addresses voltage drop in cables and electrical isolation between system components.
Covers functional earth, line connection safety, and cable disconnection.
Outlines checks, interface configuration, testing, and network commissioning.
Explains parameter adaptation and lists diagnostic methods like LEDs and system checks.
Details diagnostic status, message grouping, and specific diagnostic messages.
Describes load voltage monitoring and its diagnostic display.
Provides general technical data, ambient conditions, and protection ratings.
Details vibration, shock resistance, power supply, and UL certification data.
General| Product designation | CPX-AP-I |
|---|---|
| Electrical isolation | Yes |
| Protection class | IP65/IP67 |
| Storage temperature | -25 °C to +85 °C |
| Housing material | Die-cast aluminum |
| Number of digital inputs | 8 |
| Nominal input voltage | 24 V DC |
| Input current at nominal voltage | 7 mA |
| Input delay time | 3 ms |
| Number of digital outputs | 8 |
| Output function | PNP |
| Nominal output voltage | 24 V DC |
| Max. output current per channel | 0.5 A |
| Max. total current | 4 A |
| Short circuit strength | Yes |
| Supply voltage | 24 V DC |
| Operating voltage range DC | 18 V ... 30 V |
| Current consumption at 24 V DC | 100 mA |
| Relative air humidity | 0 - 95 % (non-condensing) |
| Note on materials | RoHS compliant |
| Mounting type | Via through-hole |
| Switch-on threshold | 11 V DC |
| Switch-off threshold | 5 V |
| Current consumption | Typically 100 mA |
To Next Page