To Next PageTo Next Page
Need help?Do you have a question about the Festo BV-200-250-C and is the answer not in the manual?
Key points for positioning the BV relative to machine height and axis alignment.
Guidance on short tubing, avoiding moving parts, and signal line distance limits.
Using position signals scanned on the rotating eccentric disc for press control.
Operation for press strokes under 15mm, requiring rotating signal scanning.
Ensuring correctly-timed advance control by offset mounting or scanning for high cycle machines.
Instructions for slow pressurization of the entire system to prevent uncontrolled movements.
Slowly pressurize the BV and perform a test run without material to check functions.
Matching BV cycle count to machine cycle count for optimized coordination and accuracy.
Table listing common faults, their causes (e.g., swapped connections), and remedies.
Key points for positioning the BV relative to machine height and axis alignment.
Guidance on short tubing, avoiding moving parts, and signal line distance limits.
Using position signals scanned on the rotating eccentric disc for press control.
Operation for press strokes under 15mm, requiring rotating signal scanning.
Ensuring correctly-timed advance control by offset mounting or scanning for high cycle machines.
Instructions for slow pressurization of the entire system to prevent uncontrolled movements.
Slowly pressurize the BV and perform a test run without material to check functions.
Matching BV cycle count to machine cycle count for optimized coordination and accuracy.
Table listing common faults, their causes (e.g., swapped connections), and remedies.
General| Brand | Festo |
|---|---|
| Model | BV-200-250-C |
| Category | Industrial Equipment |
| Language | English |
