To Next PageTo Next Page
Need help?Do you have a question about the Festo BV-200 Series and is the answer not in the manual?
Introduction to the pneumatic feed unit BV-100/BV-200.
Identifies and describes the operating parts and connections of the unit.
Explains the function and application of the pneumatic feed unit.
Outlines general instructions for proper and safe use of the product.
Describes the mechanical aspects of installing the BV unit.
Steps for commissioning the entire system, including slow pressurization.
General guidelines and checks for operating the BV unit.
Identifies common faults and provides remedies for them.
Presents a table of technical specifications for different BV models.
Introduction to the pneumatic feed unit BV-100/BV-200.
Identifies and describes the operating parts and connections of the unit.
Explains the function and application of the pneumatic feed unit.
Outlines general instructions for proper and safe use of the product.
Describes the mechanical aspects of installing the BV unit.
Steps for commissioning the entire system, including slow pressurization.
General guidelines and checks for operating the BV unit.
Identifies common faults and provides remedies for them.
Presents a table of technical specifications for different BV models.
General| Series | BV-200 |
|---|---|
| Nominal size | 2 mm |
| Mounting position | Any |
| Connection type | Threaded |
| Ambient temperature | -10 ... 60 °C |
| Pneumatic connection | G1/8 |
| Material of housing | Die-cast aluminium |
| Type | Ball valve |
| Material | Aluminum |
| Seal material | NBR |
