EasyManua.ls Logo

Festo VPPM-6TA-L-1-F-0L10H-S1 Assembly Instructions

Festo VPPM-6TA-L-1-F-0L10H-S1
2 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Montageanleitung (de)
726 382 / 2008-05NH
†‡
Proportional-Druckregelventil
VPPM-6TA-L-…
Festo AG & Co. KG
Postfach
D-73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Teileliste
12701d_1
1 Proportional-
Druckregelventil
VPPM-6TA-L-… (1x)
2 Zylinderschraube (2x)
3 Elektronikmodul
VMPA-FB-EMG-P1 (1x)
4 Zylinderschraube (2x)
5 Schutzkappe (1x)
Vorsicht
Unkontrollierte Bewegungen der angeschlossenen Aktorik.
Verletzungen können die Folge sein.
Stellen Sie sicher, dass im strom- und drucklosen Zustand montiert
wird.
Hinweis
Beschädigung von Bauelementen und Funktionsstörungen!
Beachten Sie die Handhabungsvorschriften für elektrostatisch gefähr-
dete Bauteile.
Montieren Sie nur ein Elektronikmodul 3 gleichen Typs.
2. Demontage
12701d_2
Drehen Sie die Schrauben 2
des VPPM-… 1 auf.
Ziehen Sie das VPPM-… 1
vorsichtig, ohne zu verkan-
ten, von der Anschlussplat-
te 6 ab.
Achten Sie darauf, dass die
Dichtung 7 noch in der
Nut (X) des VMPA-… 3 sitzt.
12701d_3K
Setzen Sie die Dichtung 7
ggf. wieder in die Nut (X)
ein.
12701d_4
Drehen Sie die Schrauben 4
des VMPA-… 3 auf.
Ziehen Sie das VMPA-… 3
vorsichtig von der An-
schlussplatte 6 ab.
3. Vorbereitung zur Montage
12701d_5
Ziehen Sie die Schutzkap-
pe 5 vom VMPA-… 3 ab.
4. Montage
12701d_6
Stecken Sie das VMPA-… 3
in die Anschlussplatte 6.
Drehen Sie die Schrauben 4
fest. Halten Sie das zulässige
Anziehdrehmoment ein.
Stecken Sie das VPPM-… 1
auf die Anschlussplatte 6.
Halten Sie das zulässige An-
ziehdrehmoment ein.
6
1
7
6
3
4
5
3
6
1
2
M
A
= 2 Nm _ 20%
2
4
5
X
3
M
A
= 0,4 Nm _ 20%
3
4
7
X
1
3
2
3

Other manuals for Festo VPPM-6TA-L-1-F-0L10H-S1

Question and Answer IconNeed help?

Do you have a question about the Festo VPPM-6TA-L-1-F-0L10H-S1 and is the answer not in the manual?

Festo VPPM-6TA-L-1-F-0L10H-S1 Specifications

General IconGeneral
Actuator TypePneumatic
Input Voltage24 V DC
Nominal Size6 mm
Assembly PositionAny
Electrical Connection 1, Number of Pins/Wires5
Material SealsNBR
Size6 mm
Valve FunctionProportional pressure regulator
Sealing PrincipleSoft
Pilot Air SupplyInternal
Electrical ConnectionPlug connector
Pilot ExhaustWith silencer
Operating MediumCompressed air
Note on Operating and Pilot MediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion Resistance Class CRC2
Medium Temperature-10 °C ... 60 °C
Ambient Temperature-10 °C ... 60 °C
Product Weight0.3 kg
Weight0.3 kg
Electrical Connection 1, Connection TechnologyPlug connector
Electrical Connection 1, Connector TypeM12
Electrical Connection 1, Type of MountingScrew connection
Protection ClassIP65

Related product manuals