2.5 Emission levels
The levels determined in accordance with EN
60745 are typically:
Sound pressure level L
PA
= 86 dB(A)
Sound power level L
WA
= 97 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 60745:
Sanding
a
h
= 5 m/s
2
K = 2 m/s
2
Abrasive cutting
a
h
≤ 2,5 m/s
2
K = 2 m/s
2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
Other applications, e.g. wire brushes, may
cause different vibration emission values.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The power tool is designed for abrasive cutting,
light sanding, working with wire brushes and
deburring metal and stone materials without
the use of liquid coolant or lubricant.
Use the guard provided for the application in
each case.
Only bonded cutting discs and abrasive wheels
as per EN 12413, diamond cutting discs as per
EN 13236 and wire brushes as per EN 1083 may
be used.
Do not use this power tool for polishing, sand
ing surfaces using diamond discs or for appli
cations involving diamond or hard ceramic
discs.
Cutter wheels, carbide and machining sanding
tools (with geometrically defined cutting edge)
are not suitable for use.
This power tool is intended for use with
BP Festool battery packs of the same voltage
class.
The user is liable for improper or non-in
tended use.
4 Technical data
Cordless angle grinder AGC 18
Motor voltage 18 V DC
Speed (no-load)
4500–8500 rpm
Speed settings 1
4500 rpm
2
5300 rpm
3
6100 rpm
4
6900 rpm
5
7700 rpm
6
8500 rpm
Circumferential speed of
sanding tool
80 m/s
Grinding spindle thread M 14
Sanding tool diameter 125 mm
Sanding tool thickness max. 6.0 mm
min. 1.0 mm
Weight as per EPTA proce
dure 01:2014
2.7 kg
5 Parts of the machine
[1-1]
Guard
[1-2]
Spindle lock
[1-3]
Thread for auxiliary handle
[1-4]
Speed control
English
21
To Next Page
Loading...
