Festool AP-KA 65 User Manual

706110_001
Festool Group GmbH & Co. KG
Wertstraße 20
D-73240 Wendlingen
Tel.: +49 (0)7024/804-0
Telefax: +49 (0)7024/804-20608
www.festool.com
Originalbetriebsanleitung 7 Originál návodu k obsluze 43
Original operating manual 10 Oryginalna instrukcja eksploatacji 46
Notice d’utilisation d’origine 13 Оригинално Ръководство за работа 49
Manual de instrucciones original 16 Originaalkasutusjuhend 52
Istruzioni per l'uso originali 19 Γνήσιες οδηγίες χειρισμού 55
Originele gebruiksaanwijzing 22 Eredeti kezelési utasítás 58
Originalbruksanvisning 25 Izvornik naputka za uporabu 61
Alkuperäiset käyttöohjeet 28 Originali naudojimo instrukcija 64
Original brugsanvisning 31 Originala lietošanas pamaciba 67
Originalbruksanvisning 34 Instrucþiuni de utilizare originale 70
Manual de instruções original 37 Originálny návod na používanie 73
Оригинал Руководства по эксплуатации 40 Originalna navodila za uporabo 76
Orijinal kullaným kýlavuzu 79
AP-KA 65
TR

Festool AP-KA 65 Specifications

General

Brand	Festool
Model	AP-KA 65
Category	Power Tool Accessories
Language	English

Summary

Technical Data

Symbols

Machine Features

Intended Use

Adapter Plate Installation Options

Details on installing the adapter plate in perforated boards or separate work plates.

Safety Instructions

Machine-Related Safety Instructions

Observe safety instructions for edge bander KA 65 and MFT/3, check rotary knobs.

Setup

Installation in Perforated Board LP-KA 65 MFT/3

Fitting the Adapter Plate

Steps for attaching the adapter plate using stationary fixture and angle adapters.

Installing the Edge Bander

Procedure for securing the edge bander in the adapter plate by adjusting angle.

Fitting the Guide Plates

Fitting the Additional Roller

Installing in a Separate Work Plate

Settings

Adjusting the Guide Rail Adapter

Adjusting the guide rail adapter to match edge band thickness for optimal distance.

Adjusting the Angle Scale

Using the angle scale to adapt the stationary fixture to workpiece sloping surfaces.

Edge Bander Settings

Observe edge bander operating instructions; note purging position limitation.

Working with the Machine

Attaching the Edge Band

Guiding the edge band and positioning the workpiece for applying adhesive.

Processing Shaped Parts

Tips for processing shaped parts using additional rollers and guide plates.

Attaching Solid Wood Edging

Preventive measures for brittle solid wood edging, using additional roller and angled guidance.

Accessories

Environment