www.festoolusa.com
Trim the rubber very slowly and steadily. The saw won’t be able to cut the scrap well at
such a slow speed. Anyway, what’s the rush?
Here’s a closeup of the blade eating away the new rubber. When you’re done trimming, the
rubber edge of the guide rail will be the exact line of cut. Pretty neat, eh? Now make your
first real cut on a piece of wood or plywood scrap at least ¾ in. thick. Set the saw speed to
6, and the blade depth setting the thickness of the workpiece plus the thickness of the rail
(5mm).
4
To Next Page
Loading...
