To Next PageTo Next Page
Need help?Do you have a question about the Festool TSC 55 KEB and is the answer not in the manual?
General| Battery included | No |
|---|---|
| Saw blade included | Yes |
| Number of saw blades | 1 |
| Blade diameter | 160 mm |
| Bevel adjustment | - |
| Idle speed (max) | 5200 RPM |
| Idle speed (min) | 2650 RPM |
| Cutting depth (45º) | 43 mm |
| Power source | Battery |
| Product color | White |
| Suitable for materials | Wood |
Weight and Dimensions| Weight | 4600 g |
|---|
Explanation of key safety and operational symbols used in the manual.
Guidance on how to effectively use and retain the instruction manual.
Comprehensive safety instructions applicable to all power tool operations.
Ensuring a safe working environment and mitigating electrical hazards.
Measures for operator well-being and required personal protective gear.
Guidelines for proper tool operation, maintenance, and battery management.
Procedures and precautions for servicing and maintaining the power tool.
Safe cutting practices, guard function, and methods to avoid kickback.
Safety guidelines for selecting, installing, and using saw blades.
Further safety measures, including dust hazards and recommended PPE.
Specific safety measures and recommendations for sawing aluminum.
Defines the intended applications and restricted materials for the power tool.
Detailed technical specifications for the TSC 55 KEB cordless plunge-cut saw.
Identification and description of the main parts and their functions.
Procedures for checking, handling, and inserting the battery pack.
Details on electronic features like smooth start-up and constant speed.
Recommended speeds, current limiting, brake, and temperature cut-out.
How to set and adjust the cutting depth and bevel angle.
Guide for choosing saw blades and procedure for changing them.
Fitting guards and setting up the dust extraction system.
Ensuring readiness and safe practices during tool operation.
How to operate the power switch and plunging mechanism.
Understanding kickback, its stop function, and related warnings.
Procedures for verifying and disabling the kickback stop function.
Using guide marks and performing cuts and plunge cuts.
Specific recommendations for cutting gypsum and cement boards.
Guidelines for tool maintenance, cleaning, and safety checks.
Adjusting the cutting depth for reconditioned blades.
Procedure for addressing saw table wobbles.
Information on recommended accessories and their use.
Using the guide rail and bedding in the splinter guard.
Guidelines for environmentally responsible disposal of equipment and batteries.
Details on data storage and its usage by Festool.
Details regarding Bluetooth® word mark and logos.
