To Next PageTo Next Page
Need help?Do you have a question about the Festool CSC SYS 50 EBI and is the answer not in the manual?
General| Type | Cordless Table Saw |
|---|---|
| Battery Voltage | 18 V |
| Inclination | 0° - 45° |
| Connection Ø d/e | 27/36 mm |
| Blade Diameter | 160 mm |
| Table Dimensions | 400 x 250 mm |
| Drive Type | Brushless Motor |
| Idle Engine Speed | 4500 - 6800 RPM |
Provides essential safety guidelines for operating any power tool.
Specific safety precautions for using bench-mounted circular saws.
Details the recommended specifications and types of saw blades.
Identifies and describes the physical components of the control module.
Explains the various icons and information shown on the control module display.
Steps required to prepare the power tool for initial operation.
Guides through the first-time setup assistant and reference movement.
Instructions on how to power the tool on and off safely.
Explains how to check the battery charge level.
Details adjustable settings available through the control module.
Information on using the mobile app to configure the power tool.
How to adjust the rotational speed of the saw blade.
Instructions for adjusting the vertical position of the saw blade.
Procedure to ensure accurate cutting height readings.
Procedure to ensure accurate cutting angle readings.
How to save and recall common cutting height/angle combinations.
Instructions for fitting and removing the spacer wedge.
Guidelines for connecting and using dust extraction.
General safety rules to follow during operation.
Describes the different configurations the saw can be used in.
Instructions for making cross cuts and angled cuts.
How to prepare the tool for safe transportation.
Steps to align the extension table with the main surface.
Procedure to ensure the sliding table matches the main plate height.
Information regarding the Bluetooth® word mark and its usage.
Details on the chip storing machine data and privacy policy.
