Festool MFT/3 User Manual

475235_003
Instruction manual
Page 3 - 11
IMPORTANT: Read and understand all instructions before
using.
Guide d’utilisation
Page 13 - 21
IMPORTANT: Lire et comprendre toutes les instructions
avant de démarrer les travaux.
Manual de instrucciones
Pagina 22 - 31
IMPORTANTE: Lea y comprende todas las instrucciones
antes de usar.
MFT/3 MFT/KAPEX
Instruction manual
Guide d’utilisation
Manual de instrucciones

Festool MFT/3 Specifications

General

Brand	Festool
Model	MFT/3
Category	Saw
Language	English

Summary

Technical Data

Health Hazard by Dust

Symbols

Design

MFT/3 and MFT/KAPEX Components

Lists components common to MFT/3 and MFT/KAPEX models.

MFT/3 Only Components

Lists components specific to the MFT/3 model.

Intended Use

MFT/3: Setting Up and Assembly

Step 1: Setting Up

Instructions for unfolding legs, securing knobs, and adjusting leg length.

Step 2: Trim Splinter Guard

Guide on trimming the guide rail splinter guard using a saw.

Step 3: Setting Up the Guide Rail Support

Details on positioning and securing support and swivel units on the profile frame.

Step 4: Attaching the Guide Rail

Instructions for attaching the guide rail to the support unit and adding a deflector.

Step 5: Attaching the Pre-set Profile Setting Rail

Guide on attaching the fence with guide rail as a cross or longitudinal stop.

Step 6: Calibrating Angle

Procedure for aligning the guide rail and stop ruler to ensure a 90° angle.

Step 7: Adjusting the Pre-set Profile Setting Rail

Explains how to adjust the fence parallel and perpendicular to the bench edge.

Step 8: Adjusting the Guide Rail in Relation to the Workpiece

How to lower the guide rail for better workpiece contact and stability.

Step 9: Adjusting the Cutting Depth for Sawing

Guidance on setting the correct cutting depth to avoid damaging the profile frame.

MFT/KAPEX: Mounting the KAPEX

Maintenance

Turning the Perforated Top

Instructions for flipping the perforated top when worn on one side.

Accessories, Tools

Warranty

Conditions of 1+2 Warranty

Details the terms and duration of the extended warranty.

Festool Limited Warranty

Outlines the basic one-year warranty terms and exclusions.