To Next PageTo Next Page
Need help?Do you have a question about the Festool KS 60 E and is the answer not in the manual?
General| Power consumption | 1200 W |
|---|---|
| Saw blade diameter | 216 mm |
| Cutting depth at 90°/90° | 305 x 60 mm |
| Cutting depth at 45°/90° | 215 x 60 mm |
| Cutting depth 45°/45° (left) | 215 x 40 mm |
| Dust extraction connection diameter | 27/36 mm |
| Weight | 17.8 kg |
| Voltage | 230 V |
| Saw Blade Bore | 30 mm |
Fundamental safety rules applicable to all power tools.
Specific safety precautions for operating mitre saws.
Additional safety guidelines and precautions for specific situations.
Identifies potential hazards not covered elsewhere.
Safety measures required when cutting aluminium.
Details noise emission values and related cautions.
Steps for setting up the tool for the first time.
Procedures for properly positioning and securing the machine.
Instructions on how to safely move the machine.
Correct posture and positioning for safe operation.
How to start and stop the power tool.
Overview of the tool's electronic features like soft start and speed control.
Explanation of the jolt-free starting mechanism.
How to adjust the tool's speed for different materials.
Describes the auto-shutoff feature for motor cooling.
Guide for attaching a dust extraction system.
How to adjust the guides for accurate cuts.
Instructions for extending the work surface.
Guide on choosing the correct saw blade for materials.
Step-by-step process for changing the saw blade.
Methods and precautions for securing materials before cutting.
Guidelines for material size, support, and handling.
Providing extra support for long workpieces.
Handling thin workpieces that may wobble or break.
Adjusting support for stability with heavy workpieces.
Important warnings and checks for workpiece clamping.
Ensuring the pendulum guard moves freely and closes correctly.
Maintaining cleanliness around the saw blade.
Basic operation for mitre cuts without inclination.
Method for controlled sawing of workpieces over 70mm width.
Setting and performing cuts at various mitre angles.
Adjusting for common preset mitre angles.
Fine-tuning mitre angles beyond presets.
Procedures for making bevel cuts.
How to create grooves or dados with the saw.
Information on obtaining professional assistance.
Routine procedures for keeping the tool in good condition.
Instructions for installing a new chip deflector.
Guide for replacing worn tabletop inserts.
How to maintain the spotlight feature.
Details on using the angle gauging accessory.
How to measure interior and exterior angles with the bevel.
How to transfer measured angles to the saw.
Information on different types of saw blades and related items.
