Need help?Do you have a question about the Festool KAPEX KS 120 EB and is the answer not in the manual?
General| Type | Sliding Compound Miter Saw |
|---|---|
| Power Consumption | 1600 W |
| Blade Diameter | 260 mm |
| Max Cutting Capacity (Vertical) | 120 mm |
| Max Cutting Capacity (Horizontal) | 305 mm |
| Weight | 21.5 kg |
| Laser Guide | Yes |
| Dust Extraction | Yes |
| Bevel Angle Range | 0 - 47° |
| Voltage | 230 V |
| Inclination Angle | 0° - 47° |
| Mitre Angle | 50° |
| Dust Extraction Connection Diameter | 27 mm / 36 mm |
Description of the hand grip component.
Explanation of the power switch.
Function of the switch-on lock.
Lever to adjust the maximum cutting depth.
Knob to secure the guide fixture.
Device for securing the saw during transport.
Vertical scale for mitre cut angles.
Horizontal scale for mitre cut angles.
Another horizontal scale for mitre cut angles.
Lever for preset horizontal mitre angles.
Handle for fine adjustment of vertical mitre angles.
Switch to turn the laser on and off.
Wheel to set the rotational speed.
Mechanism for quick spindle locking.
Lever to clamp the stop ruler.
Lever for special cutting positions.
Lever for special cutting positions.
Holder for the power cable.
Lever to clamp vertical mitre cuts.
Switch to select vertical mitre angle range.
General safety guidelines for operating power tools.
Safety measures for the work environment.
Safety precautions related to electricity.
Safety measures for the operator.
Guidelines for handling battery-powered tools.
Information on service and repair.
Specific safety rules for this type of saw.
Safety measures for operation.
Procedures for maintaining and repairing the tool.
Procedures for safe operation of the tool.
Safety guidelines related to the laser.
Steps for the first use of the tool.
Information related to the product delivery.
Securing the tool for transport.
Releasing the tool for operation.
Instructions for mounting the tool on a workbench.
Procedures for replacing saw blades and other tools.
Steps to remove a saw blade.
Steps to install a saw blade.
How to insert workpiece clamps.
Connecting and using the dust extraction system.
Adjusting and using the workpiece fence.
How to adjust the stop ruler.
Steps to remove the stop ruler.
Using auxiliary stops for workpiece support.
Setting horizontal mitre angles.
Preset horizontal mitre angles.
Setting other horizontal mitre angles.
Setting vertical mitre angles.
Special position for trimming strip material.
Adjusting the cutting depth limiter for grooves.
How to switch the laser on and off.
Procedures for securely clamping workpieces.
Procedures for securely clamping workpieces.
Information on dust extraction.
Adjusting the cutting depth limiter for grooves.
How to switch the laser on and off.
Procedures for securely clamping workpieces.
Procedures for securely clamping workpieces.
To Next Page
