Festool MFT/3 - MFT;KAPEX: Mounting the KAPEX; Maintenance; Turning the Perforated Top; Accessories, Tools

10
MFT/KAPEX:
Mounting the KAPEX
The perforated top on the MFT/KAPEX was
specially designed for mounting the KAPEX
KS 120.
Risk of injury! Before start-
ing work, make sure that the machine is
secured properly
Risk of injury! Respect the
maximum workpiece dimensions.
Mount the machine on the MFT/KAPEX as
shown in Fig.[12].
Secure the machine to the MFT using
clamps.
Maintenance
Turning the perforated top
When worn on one side, the perforated top
can be turned over. Loosen the four screws
in the corners underneath the bench.
Accessories, tools
For safety reasons, only
use original Festool accessories and
tools!
The accessory and tool order number can
be found in the Festool catalogue or on the
Internet under www.festool-usa.com.
12