Contents
1 Symbols.....................................................26
2 Safety warnings.........................................26
3 Intended use
..............................................30
4 Technical data........................................... 31
5 Parts of the device.....................................31
6 Control module......................................... 31
7 Commissioning..........................................32
8 Battery pack.............................................. 32
9 Settings......................................................33
10 Working with the electric power tool........36
11 Transportation...........................................38
12 Service and maintenance..........................38
13 Accessories............................................... 40
14 Environment..............................................40
15 General information..................................40
16 Troubleshooting........................................ 40
1 Symbols
Warning of general danger
Warning of electric shock
Risk of pinching fingers and hands!
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective gloves when changing
tools!
Wear protective goggles.
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section
15.2
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel
evant regulations in the UK.
Tip or advice
Handling instruction
Inserting the battery pack.
Remove the battery pack.
Direction of rotation of saw and the
saw blade
Parked position adjustment marking
Move the saw blade to the parked position
with the control module to change the spacer
wedge.
2 Safety warnings
2.1 General power tool safety warnings
WARNING!
Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Safety warnings for bench-mounted
circular saws
1) Guarding related warnings
– Keep guards in place. Guards must be in
working order and be properly mounted. A
guard that is loose, damaged, or is not
functioning correctly must be repaired or
replaced.
English
26
To Next Page
Loading...
Need help?
General