power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3 Emission levels
The levels determined in accordance with are
typically:
Sound pressure level L
PA
=
65 dB(A)
Sound power level
L
WA
=
76 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three
directions) and uncertainty K measured in
accordance with
:
Drilling in metal
Screwdriving
a
h
= 3.5 m/s
2
K=1.5 m/s
2
a
h
<
2.5 m/s
2
K=1.5 m/s
2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
An increase is possible in other applications,
with
other insertion tools or if the machine is
not maintained adequately. Take note of the
machine's idling and downtimes.
3 Intended use
Cordless drill suitable
– for drilling in metal, wood, plastics and
similar materials,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci
dents caused by improper and non-inten
ded use; this also includes damage and wear
caused by continuous industrial operation.
4 Technical data
Cordless drill C 18 Li
Motor voltage 18 V
No-load speed* 1st gear
0–450 rpm
2nd gear
0–1500 rpm
Max. torque Soft material (wood) 27 Nm
Hard material (metal) 45 Nm
Adjustable torque** 1st gear 0.8–8 Nm
2nd gear 0.5–6 Nm
Chuck clamping range 1.5–13 mm
Max. drill diameter Wood 40 mm
Metal 13 mm
Tool holder in drill spindle 1/4"
Weight excl. battery pack, incl. CENTROTEC 1.0 kg
* Speed values based on fully charged battery
pack.
** The maximum speed (value for clockwise ro
tation) is reduced in the lower torque settings.
English
13
To Next Page
Loading...
Need help?
General
