Festool CLEANTEX CT 26 E - After Finishing Work

12
X
Insert a new filter bag if necessary (see Insert-
ing the filter bag).
X Replace the top section [2-1] and close the
locking clips
[2-2] .
Changing the main filter
X Open the locking clips [2-2] and remove the top
section of the machine
[2-1] .
X Turn the top section of the machine so that the
main filter is facing upwards (Fig.
[7] ).
X Fold over the lever [7-3] and remove the retain-
er
[7-2] .
X Remove the used main filter [7-1] and replace
with a new one.
X Dispose of the used main filter in accordance
with statutory regulations.
X Insert the retainer [7-2] and fold over the lever
[7-3] until it engages.
X Replace the top section [2-1] and close the
locking clips
[2-2] .
After finishing work
X Switch off the mobile dust extractor and discon-
nect the plug.
X Wind up the mains power cable.
X Empty the dust container.
NOTE
Motor damage
X Never operate the extractor without a main filter
fitted as the motor may become damaged.
6
1
2
3
7-1
7-3
7
7-2
1
2
3
5
4