Festool CT 36 E AC - Working; 8.6 Applying the brake; 9.1 Handling; 9.2 Extracting dry materials

13
Filter
Changing the filter bag
Inserting the filter bag
X Open the locking clips [2-2] and remove the top
section of the machine [2-1] .
X Insert a new filter bag (SC-FIS-CT 26/36/48)
(Fig. [5] ) in the inlet port of the dust container
and interlock it. Important: be aware that the
locking engages.
L Make sure that the filter bag is not pinched be-
tween the top and bottom sections.
X Replace the top section [2-1] and close the
locking clips [2-2] .
Removing the filter bag
X Open the locking clips [2-2] and remove the top
section of the machine [2-1] .
X Remove the filter bag (Fig. [6] ).
X Dispose of the used bag in accordance with stat-
utory regulations.
X Clean the dust container [2-3] .
X Insert a new filter bag if necessary (see Insert-
ing the filter bag).
X Replace the top section [2-1] and close the
locking clips [2-2] .
Changing the disposal bag
Inserting the disposal bag [7]
X Open the locking clips [2-2] and remove the top
section of the machine
[2-1] .
X Insert a new disposal bag (ENS-CT26/36/48) on
the inlet nozzle of the container and lock in po-
sition.
Important: The lateral openings on the disposal
bag must be positioned inside the container.
Make sure that the bolt engages.
X Place the disposal bag over the edge of the con-
tainer.
Make sure that the contacts [7-1] are free.
X Replace the top section [2-1] and close the
WARNING
Risk of injury
X During the following procedure, take care not to
raise dust more than is unavoidable. Moisten the
main filter with a water spray before removing it.
1
2
3
5
SC-FIS-CT 26/36/48
1
3
6
1
2
3