Contents
1 Safety warnings.........................................14
2 Symbols.....................................................15
3 Parts of the device.....................................15
4 Technical data........................................... 16
5 Intended use..............................................16
6 Commissioning..........................................16
7 Settings......................................................17
8 Working..................................................... 18
9 Service and maintenance..........................18
10 Environment..............................................19
11 General information..................................19
1 Safety warnings
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instruc
tions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
– This machine must not be used by persons (including children) with re
duced physical, sensory or mental capabilities, or lack of experience
and knowledge.
Children need to be supervised to ensure they do not
play with the machine.
– WARNING The machine may contain hazardous dust. Only have the ma
chine maintained and emptied, and only have the filter replaced by an
authorised specialist using suitable protective equipment.
– Always operate with the filter system installed.
– Risk of explosion and fire! Do not extract:
– Sparks or hot dust;
– combustible or explosive materials (e.g. magnesium, aluminium, pet
rol, diluting agents);
– aggressive materials (e.g. acid, alkaline solutions, solvents);
– chemically reactive materials, which lead to the generation of heat,
acids/bases, gases, etc. (e.g. reactive two-component materials, alu
minium and water).
– Observe all national safety regulations as well as the material manufac
turer's specifications.
– Always use suitable protective equipment.
– If intact following a visual inspection, work in a dry environment accord
ing to instructions.
– Only use the electrical outlet module on the machine for its stated pur
pose.
– Check the plug and the cable regularly in order to prevent a hazard. In
the event of damage, these must be replaced by an authorised service
workshop only.
– Do not lift or transport the machine using a crane hook or lifting gear.
English
14
To Next Page
