Festool ETS 125 REQ - Intended Use; Parts of the Machine; Technical Data

ated in the dust bag when processing met
als. This increases the risk of fire.
– If the power tool is dropped or falls, check
for damage to the machine and sanding
pad. Remove the sanding pad for closer
inspection. Have the damaged parts re
paired before use. Broken sanding pads
and damaged machines can cause injuries
and machine instability.
– Always use original Festool sanding pads.
Sanding pads from other manufacturers
are not suitable for the sander speed and
may break.
– An electrostatic charge may build up when
using the long-life dust bag. If possible,
always use the power tool with an anti-
static suction hose (AS). A slight electric
shock may cause you to panic briefly and
become distracted, which may result in an
accident.
2.3 Emission levels
The levels determined in accordance with
EN 62841 are typically:
Sound pressure level L
PA
= 73 dB(A)
Sound power level L
WA
= 84 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
Vibration emission value (3-ax
is)
a
h
= 3.5 m/s
2
K = 2.0 m/s
2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate
rials that contain asbestos must not be pro
cessed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in
tended use.
4 Technical data
Eccentric sanders ETS 125REQ
Performance 250 W
Speed (idle)
6000 - 12000 rpm
Max. speed
[2]
16000 rpm
Sanding stroke 2,0 mm
Sanding pad D 125 mm
Weight (without mains ca
ble, with sanding pad)
1,2 kg
5 Parts of the machine
[1-1]
On/off switch
[1-2]
Plug-it connection
[1-3]
Speed control
[1-4]
Extractor connector
[1-5]
Sanding pad
[1-6]
Protector
[1-7]
Long-life dust bag
[2] Max. speed in the event of faulty electronics.
English
13