9
2 - 3
• interim paint sanding on stained surfaces
• cleaning natural wood window grooves with sand-
ing felt
1 - 2
• sanding stained edges
• sanding thermoplastic synthetics
Maintenance and care
Any maintenance or repair work
requiring the motor housing to be opened may only
be carried out by an authorised service workshop.
Maintenance or repair work carried out by an unau-
thorised person can lead to the wrong connection of
the power leads or other components, which in turn
can lead to accidents with serious consequences.
Always remove the plug from the
mains supply socket before carrying out any work
on the machine!
Always keep the machine and the ventilation slots
clean.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/
service
EKAT
1
2
3
5
4
Use only original Festool spare
parts! Order No. at:
www.festoolusa.com/service
Sanding base brakes
The sanding base is braked by a collar [8-1] in order
to prevent any uncontrolled excessive speed of the
sanding base. Because the collar wears down in
the course of time, it has to be replaced by a new
one (453388) as soon as there is any reduction in
the braking effect.
Accessories, tools
For safety reasons, only use
original Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.
8-1
8
To Next Page
Loading...
