ETSC 125 Li
15
GB
4Technical data
5 Machine features
* not on all versions included in the scope of deliv-
ery
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
6.1 Switch on/off
The switch
[1-1]
is an on/off switch (I = ON, 0 =
OFF).
When the battery is empty, or if there is a power
failure or the mains plug is removed, move the
on/off switch immediately to the Off position.
This prevents uncontrolled restarting.
6.2 Battery pack
Inserting the battery pack
[2a]
Removing the battery pack
[2b]
Capacity display
Pressing the green button on the capacity display
[1-3]
shows the charge status of the battery pack:
6.3 Mains adapter
The mains adapter (available as an accessory de-
pending on the model) facilitates use of the cord-
less sanding technology with mains power, en-
abling you to switch between power supply sources.
The mains adapter enables the mobile dust ex-
tractor's automatic electronic switch-on/shut-off
function.
Insert the mains adapter
[3a]
Connect the mains adapter and plug-it cable
[3b]
Remove the mains adapter
[3c]
Detach the mains adapter from the plug-it cable
[3d]
7 Settings
7.1 Electronics
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Temperature cut-out
To avoid the motor overheating, the power con-
sumption is limited at an excessive motor tempera-
ture. If the temperature continues to rise, the pow-
er tool switches off and can only be switched on
again once the motor has cooled sufficiently.
Cordless random orbit
sander
ETSC 125Li
Voltage 18 - 20 V
No-load speed 6000 - 10000 rpm
Sanding stroke 2.0 mm
Sanding pad D 125 mm
Weight (excl. battery pack,
incl. sanding pad)
1 kg
[1-1]
On/Off switch
[1-2]
Battery pack
[1-3]
Capacity display
[1-4]
Extractor connector
[1-5]
Speed control
[1-6]
Sanding pad
[1-7]
Edge protector
[1-8]
Handle (insulated gripping surface)
[1-9]
Mains adapter with plug-it connection*
[1-10]
Plug-it cable*
[1-11]
Long-life dust bag
70 - 100%
40 - 70%
15 - 40%
< 15%
Recommendation:
Charge battery
pack before further use.
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
WARNING
Risk of injury
When working on power tools, always remove
the batteries or disconnect the mains adapter
first.
To Next Page
Loading...
Need help?
General