Festool OSC 18 - Mounting the adapter; Dust extraction device; Depth stop

will most likely affect the quality of your results
and limit warranty claims. Machine wear or
your own personal workload may increase de
pending on the application. Protect yourself and
your machine, and preserve your warranty
claims by always using original Festool acces
sories and Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festoolusa.com".
12.1 Mounting the adapter [5]
A depth stop, dust extraction device and posi
tioning aid can be mounted on the adapter. Us
ing the detent button [5-1], these can be offset
in 30° increments in line with the tool.
5
5-1
5
Nm
12.2 Dust extraction device [6]
► Mount the adapter [5].
► Attach the dust extraction device.
► Connect the suction hose.
6
2
3
1
12.3 Depth stop [7+8]
► Mount the adapter [5].
► Attach the depth stop – [7a] or [7b].
► Engage the adjusting lever [8-1] to set the
cutting depth.
7a
1
2
3
7b
1
3
2
1
2
8-2
8-3
8-1
8
English
13