12
CS 50 EB
Bench-mounted circular saw and circular trim-
ming saw CS 50 EB / CS 50 EB Floor
1 Symbols ................................................... 12
2 Intended use ............................................ 12
3 Technical data ........................................ 12
4 Safety instructions .................................. 12
5 Setting up, commissioning ...................... 15
6 Electronics ............................................... 16
7 Machine settings ..................................... 17
8 Working with the machine ...................... 18
9 Maintenance and care ............................. 18
10 Accessories, tools ................................... 19
11 Disposal ................................................... 19
The specified illustrations can be found at the
beginning of the operating instructions.
1 Symbols
Warning of general danger
Read the operating instructions/notes
Wear a dust mask!
Wear ear protection!
2 Intended use
The PRECISIO is designed as a transportable elec-
tric power tool for sawing wood, plastics, panel
materials made of wood and similar materials.
With the special saw blades for aluminium offered
by Festool, these machines can also be used for
sawing aluminium.
Materials containing asbestos must not be pro-
cessed. The user is liable for any damage or ac-
cidents resulting from use not in accordance with
the intended use.
3 Technical data CS 50 EB/CS 50 EB Floor
Cutting depth at 90°/45° 0 - 52 mm/0 - 37 mm
Inclination -2° to 47°
max. drawing length 300 mm
Saw blade (diameter x cutting width) 190 x 2,6 mm
Idling speed 1600 - 4200 rpm
Power consumption 1200 W
Bench dimensions (length x width) 600 x 400 mm
Bench height with / without foldaway legs 900 mm/375 mm
Weight without foldaway legs 19 kg
Weight of foldaway legs 2 kg
Degree of protection
/ II
4 Safety instructions
4.1 General safety instructions for power
tools
WARNING Read all safety instruc-
tions, other instructions and technical data
provided with this power tool, and take a look at
the illustrations. Failure to observe the following
instructions may lead to electric shocks, fires and/
or serious injuries.
Keep all safety and other instructions in a safe
place for future reference.
The term “power tool” used in the safety instruc-
tions refers to mains-powered power tools (with
power cable) and battery-powered power tools
(without power cable).
1 OCCUPATIONAL SAFETY
a. Keep your working area clean and well-lit. Un-
tidy, unlit working areas may lead to accidents.
b. Do not operate the power tool in a potentially
explosive environment containing flammable
fluids, gases or dust. Power tools generate
sparks that may ignite dust or vapours.
c. Keep children and other persons away from
the power tool during use. If you are distracted,
you may lose control of the tool.
To Next Page
Loading...
