To Next PageTo Next Page
Need help?Do you have a question about the Festool PRECISIO Series and is the answer not in the manual?
General| Arbor Size | 30 mm |
|---|---|
| Cord Length | 4 m |
| Vibration Emission Value | 2.5 m/s² |
| Power Source | Electric |
| Dust Extraction Connection Diameter | 27/36 mm |
Describes the foldable legs of the machine.
Details the power switch for operating the machine.
Feature for storing the power cable.
Component that fits into the saw table.
Knob used to adjust the fence position.
Component used with the saw blade for specific cuts.
Lever for controlling saw movement or locking it.
Mechanism to set the saw blade's cutting depth.
Protective cap, possibly for a leg adjustment.
Slot on the machine for accessories or guides.
Knob to adjust the position of the safety cover.
Knobs used to secure the foldable legs.
Specific safety guidelines for operating the machine.
Specifies necessary protective gear like ear protection, goggles, and gloves.
Warns about hearing damage from noise and advises ear protection.
Discusses potential dangers like thrown workpieces, dust, and noise.
Instructions for setting up the machine and its components.
Details on the machine's electronic features like smooth start-up and speed control.
Procedure for moving the saw to its set-up position for adjustments.
Steps for setting the desired cutting depth for the saw blade.
Guide on how to tilt the saw blade for angled cuts.
Instructions for removing and installing saw blades.
Procedure for positioning the spacer wedge for different cuts.
Details on attaching, adjusting, and using the machine's fence.
Steps to install the splinterguard for safer operation.
Information on connecting a dust extractor for dust removal.
Guidance on operating the machine in its bench-mounted configuration.
Instructions for using the machine in the trimming saw mode.
