Festool RAS 180.03 E-AH User Manual

12
Rotary sander RAS 180.03 E-AH
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
5.1 General safety instructions
5.2 Machine-related safety instructions
5.3 Emission levels
6 Commissioning
7 Machine settings
7.1 Electronics
7.2 Replacing the brush insert
7.3 Changing sanding pads
7.4 Changing the abrasive
7.5 Dust extraction
8 Working with the machine
9 Service and maintenance
10 Disposal
11 Accessories
12 Warranty
13 Declaration of Conformity
The specifi ed illustrations are at the beginning of
this operating manual.
1 Symbols
Warning of general danger
Electric shock
Wear ear protection.
Wear eye protection.
Read the operating instructions/notes
2 Technical data
Power consumption 1500 W
Rotational speed 800 – 4000 rpm
Tool dia. 180 mm
Spindle thread M 14
Dust extractor connection diameter 27 mm
Protection class
/ II
Weight 4.2 kg
3 Machine features
[1-1] On/off switch
[1-2] Switch-on lock
[1-3] LED
[1-4] Speed control
[1-5] Additional handle
4 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, composite, paintwork, filler,
metal and similar materials.
The user bears the responsibility for damage and
accidents caused by improper use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
- Never allow children to use the machine.
5.2 Machine-related safety instructions
- This power tool is intended to function as a
sander. Read all safety warnings, instructions,
illustrations and specifi cations provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fi re
and/or serious injury.
- Operations such as grinding, wire brushing,
polishing or cutting-off are not recommended
to be performed with this power tool. Opera-
tions for which the power tool was not designed
may create a hazard and cause personal injury.
- Do not use accessories which are not specifi -
cally designed and recommended by Festool.
Just because the accessory can be attached to
your power tool, it does not assure safe opera-
tion.
- The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fl y apart.
- The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool. Incorrectly sized accessories

Festool RAS 180.03 E-AH Specifications

General

Brand	Festool
Model	RAS 180.03 E-AH
Category	Sander
Language	English