To Next PageTo Next Page
Need help?Do you have a question about the FEZEN ZM1515 and is the answer not in the manual?
Details on operating the appliance using the "Rev", "O", "Soft", and "Hard" modes for various functions.
Step-by-step instructions for assembling the juicer components before operation.
The FEZEN ZM1515 is a user-friendly juicer designed for domestic and indoor use, offering efficient juice extraction and straightforward maintenance. This appliance is built with safety and convenience in mind, featuring an intelligent protective chip and a current-limiting design to ensure prolonged service life and user safety.
The primary function of the FEZEN ZM1515 is to extract juice from various fruits and vegetables. It operates by grinding food ingredients using a spiral pusher and a juice strainer or squeezer, separating the juice from the pulp. Food ingredients are fed into the appliance via a feed port at the top of the juicing body and then processed, with juice discharged through a juice outlet and pulp through a separate pulp outlet. The appliance is equipped with a power switch that controls its operating statuses, including "Rev" for reverse motion, "O" for shutdown, "Soft" for soft ingredients, and "Hard" for hard ingredients, allowing for versatile processing based on the type of produce. The "Rev" function is particularly useful for discharging blockages or when the motor is locked, enhancing operational reliability.
The FEZEN ZM1515 is designed for ease of installation and operation. Before first use, it is crucial to clean all parts that come into direct contact with food ingredients. Installation involves connecting the juicing body to the main body by aligning a triangular mark and turning it anticlockwise until a click is heard, indicating a secure connection. The hexagonal shaft of the spiral pusher is then aligned with a hole on the main body and pushed in. The juicer strainer is fitted into the tail of the spiral pusher, aligning its clips with clamping slots in the juicing body. The squeezer is aligned with an arrow on the juicing body and turned anticlockwise. Finally, the juice cup is positioned below the juice outlet, and the residue cup below the residue outlet.
Once assembled, the appliance is connected to a power supply, ensuring the power switch is in the "OFF" position beforehand. Users should wash and cut vegetables and fruits into sizes that fit the feed port and place them on the food tray. The appliance is operated by pressing either the "Soft" or "Hard" button, depending on the ingredients. It is recommended to operate the appliance for no longer than 10 minutes per usage. During operation, a pushing rod is used to guide food ingredients downwards into the feed port, optimizing juice extraction efficiency.
Safety is a key aspect of the FEZEN ZM1515's design. Users are advised not to insert hands or sharp objects into the feed port and to avoid touching the spiral pusher when the appliance is running. Food ingredients with pits, hard seeds, thick skin, or shells should be prepared by removing these parts before juicing. The appliance features an intelligent protective chip that automatically shuts it down after 20 minutes of continuous running, requiring a 20-30 minute cool-down period before resuming operation to prevent overheating and prolong its service life. Furthermore, a current-limiting design is incorporated: if hard food ingredients cause the motor to lock and the current rises above 1.3A, the motor will alert, pause for 2 seconds, reverse automatically for 5 seconds to discharge obstruction, and then shut down. In such cases, users can press the "ON" button to resume normal operation. If the motor remains locked, pressing the "OFF" button, then "REV" to clear obstruction, and finally "ON" again is recommended. If the motor is still locked, manual removal of obstruction from the spiral pusher is advised to protect the motor.
Maintaining the FEZEN ZM1515 is straightforward, ensuring hygiene and longevity. After each use, the appliance should be cleaned immediately. Before cleaning, it is essential to ensure the power switch is in the "ON" position and the power supply is disconnected. The main body should not be rinsed under running water; instead, any stains should be wiped away with a damp cloth. All dismountable parts, however, can be rinsed with clean water.
The cleaning process involves several steps: first, extract the pushing rod. Next, press the button on the side of the juicing body and simultaneously turn the juicing body clockwise to dismount it. The juicing body cannot be dismantled if the button is not pressed. Once the juicing body is dismounted, the juicing button, juicing body cap, juice strainer (or squeezer), and spiral pusher can be taken down in that order. These dismountable parts can then be thoroughly rinsed with clean water. It is important not to sterilize any parts in hot water with a temperature higher than 80°C or in a microwave oven, as this can lead to permanent deformation and damage. Similarly, abrasive cleaning agents, steel wool, or corrosive liquids like gasoline should not be used for cleaning. Before storing the appliance, all parts must be clean and dry.
The manual also emphasizes that any analysis and elimination methods for common faults provided are merely indications. For any other faults, users should contact customer service or an authorized service center for repairs, and should not attempt to dismantle or repair the appliance themselves to avoid hazards.
General| Type | Centrifugal Juicer |
|---|---|
| Voltage | 220-240V |
| Frequency | 50/60Hz |
| Color | Silver |
| Material | Stainless Steel |
