FFE FDL242 - Device User Interface and Controls

Page 11
Alignment Status Indicators: see process flow descriptions for Targeting and Alignment on the following pages.
Switch settings for different processes:
- Laser Targeting:
- Settings: “Alignment-Auto” or “Alignment-Manual”, “Targeting-Laser”
- Start Laser Targeting by changing Slide Switch from “Operate” to “Align”
- Automatic Alignment after Targeting:
- Settings: “Alignment-Auto”, “Targeting-Laser” or “Targeting-Prism”
- Start Automatic Alignment by changing Slide Switch from “Align” to “Operate”
- Prism Targeting:
- Settings: “Alignment-Auto” or “Alignment-Manual”, “Targeting-Prism”
- Start Prism Targeting by changing Slide Switch from “Operate” to “Align”
- Manual Alignment after Targeting:
- Settings: “Alignment-Manual”, “Targeting-Laser” or “Targeting-Prism”
- Start Manual Alignment by changing Slide Switch from “Align” to “Operate”
- Normal operation:
- Settings: Alignment: Auto or Manual, Targeting: Laser or Prism
- Normal operation is automatically started after successful finalization of Alignment process
Direction Keys: used to align the FDL242 in the laser targeting, prism targeting and manual alignment processes.
User Interface