To Next PageTo Next Page
Need help?Do you have a question about the FG Modellsport 68500 and is the answer not in the manual?
Observe security advice for fuel handling, refueling, and storage to prevent hazards.
Step-by-step instructions for assembling the front and rear differential gears.
Mounting the front axle housing, belt channel, and pulley systems.
Install rear axle cover, braces, and lower wishbones.
Assemble damper plate, uprights, and mount rear shock absorbers.
Install front wishbones, uprights, and drive axles.
Mount front shock mounts and bumpers for Baja and Monster/Stadium models.
Prepare engine, assemble clutch, install gear train and air filter.
Mount the engine and fuel tank assembly onto the chassis.
Mount RC plate, servos, receiver, and battery mount.
Assemble and adjust the servo saver, and connect throttle/brake rods.
Connect throttle and brake rods to carburetor arm and servo arm.
Cut wheel cases and openings for aerial, tank cap, and track rods.
Detailed exploded view of the Baja Buggy 4WD with part numbers.
Detailed exploded view of Monster/Stadium 4WD with part numbers.
Comprehensive lists of spare parts for various models.
General| Category | Toy |
|---|---|
| Fuel | Gasoline |
| Power Source | Internal Combustion Engine |
| Width | 480 mm |
| Scale | 1:5 |
| Engine | 26cc 2-stroke |
