Farmer-Helper DW30 Chipper 18 Revision 09 - 2017
5.2 MACHINE COMPONENTS
The FHM 3 Point
Hitch Wood Chipper is a
rotor with blades for chip-
ping wood. A hinged feed
hopper moves the wood
material into the rotor.
Each rotor is designed with
4 blades and a twig-break-
er to generate the small
pieces of wood. A station-
ary knife at the rear of the
rotor housing is placed by
the moving knives to shear,
chip or chop the material.
The tractor provides
rotational power through
a PTO shaft on the front
of the frame .
A Self Feed Hopper
B Rotor Housing
C 3 Point Hitch
D Rotor Blade
E Rotor
F Paddle
G Discharge Hood
H Hood Deflector
I Stationary Blade
To Next Page
Loading...