Farmer-Helper DW30 Chipper 22 Revision 09 - 2017
5.7 TRANSPORTING
TRANSPORT SAFETY
1. Comply with state and local laws govern-
ing safety and transporting of machinery on
public roads.
2. Check that all the lights, reflectors and
other lighting requirements are installed
and in good working condition.
3. Do not exceed a safe travel speed. Slow
down for rough terrain and cornering.
4. Fold up and secure feed hopper before
moving or transporting.
5. Be sure the trailer is hitched positively to
the towing vehicle and a retainer is used
through the mounting pins.
6. Do not drink and drive.
7. Be a safe and courteous driver. Always
yield to oncoming traffic in all situations,
including narrow bridges, intersections,
etc. Watch for traffic when operating near
or crossing roadways.
8. Never allow riders on the machine.
When transporting the machine, review and follow
these instructions:
1. Clear the area of bystanders, especially small
children.
2. Check that all the lights and reflectors re-
quired by the highway authorities are in place,
clean and working.
3. Ensure that the machine is securely attached
to the tractor with a retainer through the
mounting pins.
4. Do not allow riders.
5. Never exceed a safe travel speed. Slow
down when encountering rough road condi-
tions and cornering.
6. Do not drink and drive.
7. Raise and secure the feed hopper before
transporting.
8. Turn the discharge hood and point toward the
rotor to reduce the width of the machine.
TRANSPORT CONFIGURATION
Pdf 27.png
To Next Page
Loading...