Need help?Do you have a question about the Fiamma F45L and is the answer not in the manual?
General| Brand | Fiamma |
|---|---|
| Model | F45L |
| Category | Accessories |
| Language | English |
The lead bar of the awning is lower on one side (left or right).
Adjust the upper bolt of the Dual Shock Absorber to correct lead bar alignment.
The lead bar of the awning does not close properly in the left side.
Turn the left side of the Presto Fix clockwise to ensure proper lead bar closure.
Open awning, remove end covers, legs, and fabric fasteners.
Remove old fabric, install new fabric into the lead bar, and unroll it.
Reassemble covers, end caps, and check arm alignment after securing fabric.
Open awning fully and remove the leg from the lead bar.
Detach arm from shock absorber, remove securing screws and nut.
Secure new arm with spring, insert into lead bar, and tighten screws.
Measure distance, reopen awning, place arm, and secure attachment.
To Next Page
