What to do if the lead bar on my Fiamma F65 Eagle Accessories awning doesn't close properly?
If the lead bar of your Fiamma Accessories awning isn't closing properly on the side opposite the winch, start by unrolling the awning completely. Then, use a screwdriver to adjust the roller regulation cup (ring nut A). Carefully turn down the notch of the Presto Fix a little.
How to adjust the arm on a Fiamma F65 Eagle Accessories awning?
To adjust the arm of your Fiamma Accessories awning, follow these steps: 1. Completely open the awning. 2. Lightly loosen screw A. 3. Unscrew the dowel for regulation (it is a stop screw) until it's nearly out. 4. Operate on screw B, gradually rotating clockwise to raise the arm and counter-clockwise to lower it, ensuring the lead bar moves horizontally. 5. Once the correct adjustment is found, screw in screw C until it stops, and then lock screw A.
General advice and safety checks for mounting the awning.
General| Type | Awning |
|---|---|
| Model | F65 Eagle |
| Fabric Color | Various |
| Mounting | Roof or wall |
| UV Protection | Yes |
| Water Resistance | Yes |
| Category | Accessories |
| Projection | 2.5 meters |
| Material | Aluminum and fabric |
| Operation | Manual |
| Case Color | Silver |
To Next Page
