Fiat 127 - Page 18

Fiat 127 Internet Fan Club (http://fiat127.okruhy.cz) Fiat 127 - 1050
18/34
3.25 …and the inner to outer rotor clearance 3.27A Fit the oil pump pressure relief valve plunger and
spring…
3.27B …followed by the retainer plate and circlip 3.28 Refit the pump lower half body
3.29 Fit the oil pump to the crankcase 3.30 The oil tube is secured by a bracket to the centre main
bearing cap with a bolt and washer