POWER CONVERTIBLE TOP
On vehicles equipped with a power convertible top, the power convertible top switch is
located on the overhead console. The switch contains two buttons. The passenger side
button, is used to open the power top, and the driver side button, is used to close the
power top.
NOTE:
• The power top buttons will operate when the ignition switch is turned to the ACC/
ON/RUN position.
• The power top can be remotely operated with the key fob. Refer to “Opening Power
Top Remote Function” in “Things To Know Before Starting” in the Owner’s Manual on
the DVD for more information.
Lowering The Power Top
Auto Open
Push the top open button approximately one second for the three-quarter open/spoiler
position. Push the top open button for approximately one second a second time to fully
open the conver tible top.
Manual Open
For manual open, push and hold the open button until desired roof position or until
spoiler position.
NOTE:
Vertical movement only operates in auto open/close mode.
Raising The Power Top
Auto Close
From the convertible top fully open position, push the top close button for approximately
one second for t he three-quarter open/spoiler position. Push the top close button for
approximately one second a second time for t he one-quarter open position. Push and
hold close button to fully close convertible top.
Manual Close
For manual close, push and hold the close button until desired position until one-quarter
open position. Push and hold again for full close position.
NOTE:
Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are
present. Refer to “Fluids, Lubes, and Genuine Part” in “Maintaining Your Vehicle” in the
Owner’s Manual on the DVD for information.
OPERATING YOUR VEHICLE
27
To Next Page
Loading...
