TRIP BUTTON
• The Trip button is located on the end of
the wiper lever to the right of the s teer-
ing column. The trip button can be used
to display and reset the following func-
tions:
• Range
• Distance Travelled
• Average Consumption
• Instant Consumption
• Average Speed
• Travel Time
• Short press (less than 1 second) to dis-
play different functions.
• Long press (more than 1 second) to reset and start a new trip.
New Trip
• A new trip can be reset or res tarted by:
• “Manual” resetting by the user, by pressing the Trip button;
• “Automatically” resetting, when the “Trip distance” reaches 9999.9 miles or when the
“Travel time” reaches 99.59 (99 hours and 59 minutes);
• After disconnecting/reconnec ting the battery.
Trip A
• Shows the total distance traveled for Trip A since the last reset.
Trip B
• Shows the total distance traveled for Trip B since the last reset.
Star t Of Trip Procedure
• With the ignition key on, press and hold the TRIP button for over one second to reset
Trip A or Trip B.
Exit Trip
• The Trip function is over when all the values have been displayed or holding the
MENU ESC button for longer than one second.
• Briefly press the MENU ESC button to go back to the menu screen or press and hold
the MENU ESC (approximately one second) to go back to the main screen without
storing settings.
ELECTRONICS
41
To Next Page
Loading...
