TRIP BUTTON
• The Trip button is located on the end of
the wiper lever to the right of the steer-
ing column. The trip button can be used
to display and reset the following func-
tions:
• Instant Consumption (Kilowatts)
• Trip A
• Trip B
• Tire Pressure
• Short press (less than 1 second) to dis-
play different functions.
• Long press (more than 1 second) to
reset and start a new trip.
New Trip
• A new trip can be reset or restarted by:
• “Manual” resetting by the user, by press-
ing the Trip button;
• “Automatically” resetting, when the “Trip distance” reaches 999.9 miles or when the
“Travel time” reaches 99.59 (99 hours and 59 minutes);
Star t Of Trip Procedure
• With the ignition key on, press and hold the TRIP button for over one second to reset
Trip A or Trip B.
Exit Trip
• The Trip function is over when all the values have been displayed or holding the
MENU ESC button for longer than one second.
• Briefly press the MENU ESC button to go back to the menu screen or press and hold
the MENU ESC (approximately one second) to go back to t he main screen without
storing settings.
ELECTRONICS
53