CHARGING THE HIGH VOLTAGE BATTERY
1. Put the vehicle in PARK.
2. Turn the ignition to the OFF position.
3. Remove t he Level 1 EVSE from its storage bin by lifting the rear cargo cover.
4. Uncoil the entire length of the EVSE
(charge cord).
5. Plug the EVSE into a standard 120V AC
outlet that is properly grounded. It is
recommended that the EVSE is con-
nected to an AC outlet on a circuit
which is not electrically loaded by other
devices. Extension cords may not be
used.
NOTE:
All of the EVSE LED’s illuminate green.
6. Open the charge receptacle door.
NOTE:
The charge receptacle door is locked
whenever the vehicle is locked. Unlock the
doors to unlock the charge receptacle door
for charging.
GETTING STARTED
16
To Next Page
