FLUID CAPACITIES
Systems
U.S. Metric
Power Electronics Cooling System 3.6 Quarts 3.5 Liters
Battery Thermal Management Cooling System 7.0 Quarts 6.7 Liters
Single-Speed Transmission 0.8 Quart 750 ml
FLUIDS, LUBES, AND GENUINE PARTS
Component Fluid, Lubricant, or Genuine Part
Coolant
MOPAR Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT (Organic Addi-
tive Technology) or equivalent meeting the
requirements of FCA Material Standard
MS.90032.
Brake Mas ter Cylinder
MOPAR DOT 3, SAE J1703 should be
used. If DOT 3, SAE J1703 brake fluid is
not available , then DOT 4 is acceptable.
Use only recommended brake fluids or
equivalent.
Refrigerant MOPAR R134a
Compressor Lubricant
MOPAR POE Oil or Equivalent meeting
the requirements of FCA Material Stan-
dard MS-12727
Single-Speed Transmission Castrol BOT 533
CAUTION!
•
Mixing of coolant (antifreeze) other than specified Organic Additive Technology (OAT)
coolant (antifreeze), may result in cooling system damage and may decrease corrosion
protection. Organic Additive Technology (OAT) coolant is different and should not be
mixed with Hybrid Organic Additive Technolog y (HOAT) coolant (antifreeze). If a non-
OAT coolant (antifreeze) is introduced into the cooling system in an emergency, it
should be replaced with the specified coolant (antifreeze) as soon as possible.
• Do not use water alone or alcohol-based coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator coolant and may plug the radiator.
•
This vehicle has not been designed for use with propylene glycol-based coolant (anti-
freeze). Use of propylene glycol-based coolant (antifreeze) is not recommended.
MAINTAINING YOUR VEHICLE
102
To Next Page
Loading...
