70 Capron - 04-17 - CAP-0017-01EN
Gas system
8
8.3 Gas consumption
8.4 Changing gas bottles
Open external gas bottle compartment (see section 7.2).
If there is a guard plate, fold it down.
Close the regulator tap (Fig. 65,4) on the gas bottle. Pay attention to the
direction of the arrow.
Unscrew the gas pressure regulator (Fig. 65,2) from the gas bottle at the
hexagon nut (Fig. 65,3).
Remove the gas pressure regulator and the gas tube (Fig. 65,1) from the
gas bottle.
Release the fixing belts and remove the gas bottle.
Place a filled gas bottle in the gas bottle compartment.
Fix gas bottle in place with the fixing belts.
Position the gas pressure regulator (Fig. 65,2) and the gas tube (Fig. 65,1)
on the gas bottle and screw in tightly to the gas bottle at the hexagonal nut
(Fig. 65,3).
If there is a guard plate, fold it upwards.
Close the external flap (see section 7.2).
Z The data about gas consumption of the individual gas devices is standard
average values.
Appliances Gas consumption in grams/hour
Heater Approx. 170 - 490 g/h
Cooker, per cooker Approx. 140 - 165 g/h
Refrigerator Approx. 18 g/h
X When changing gas bottles, do not smoke or create any open fire.
X When you have changed the gas bottle, check whether gas escapes at
the connection points and unions. Use a leakage search spray to spray
the relevant connection point or union. These agents are available at the
accessories shop.
Fig. 65 Gas bottle connection
To Next Page
Loading...
