9
FIAT PANDA 4 x 4
REAR LIGHT UNITS
The bulbs are arranged inside the light unit
as follows fig. 21:
A 12V-W5W, double filament bulb for
brake lights/taillights.
B 12V-P21W bulb for direction indica-
tors.
C 12V-P21W bulb for rear fog light (left
headlight) or reversing light (right head-
light).
To change a bulb proceed as follows:
❒
loosen the three screws A-fig. 22 then
pull gently the headlight outwards un-
til releasing it from the three catches;
fig. 22
F0G0625m
fig. 23
F0G0626m
❒
loosen the four screws A-fig. 23 and
disconnect the two connectors;
❒
remove the required bulb holder turn-
ing it counter-clockwise;
❒
remove the required bulb (A, B or C-
fig. 21), pushing it slightly and turning
it counter-clockwise (bayonet cou-
pling), then fit the new bulb.
fig. 21
F0G0627m
To Next Page
Loading...
