8
FIAT PANDA 4 x 4
❒
loosen the three fastening screws A-
fig. 15 and remove the headlight cov-
er;
❒
remove the cover by removing the
catches B;
❒
remove the lens fig. 16 by loosening
the three fastening screws A;
❒
turn connector A-fig. 17 counter-
clockwise and remove it;
❒
remove the bulb B-fig. 17 and fit the
new bulb.
To change the direction indicator bulb,
proceed as follows:
❒
loosen the two fastening screws A-
fig. 18 and remove the cover B;
❒
loosen the fastening screws A-fig. 19
and remove the lens B;
❒
remove the cap A-fig. 20 from the lens
B and remove the bulb holder C;
❒
remove bulb D by pushing it slightly and
turning it counter-clockwise, then fit
the new bulb.
To change side direction indicators, third
brake light and number plate light bulbs re-
fer to paragraph “When needing to change
a bulb” in section “In an emergency” in the
attached Owner Handbook.
fig. 15
F0G0620m
fig. 17
F0G0622m
fig. 16
F0G0621m
fig. 18
F0G0623m
fig. 19
F0G0624m
fig. 20
F0G0631m
To Next Page
Loading...
