HG6145F GPON Optical Network Terminal Product Manual
Table 2-10 Functions and Features of the HG6145F (Continued)
Item
Description
Supports OMCI channel encryption.
Registration
authentication
Supports the ONT registration process as specified in ITU-T. G.984.3.
Supports four authentication modes: SN, Password, SN＋Password and LOID.
Supports performance statistics for the Ethernet interface.
Supports performance statistics for the GEM interface.
Ethernet
Complies with the IEEE 802.3 standard.
Supports configuring the Ethernet interface rate, working mode, and MDI/MDIX
auto-negotiation mode.
Supports manual configuration to the rate 10/100/1000 Mbit/s.
Supports manual configuration of the half duplex or full duplex mode.
Supports unlink / downlink rate control based on the Ethernet interface, with the
control granularity of 64 kbit/s.
Supports the PAUSE flow control.
Supports the loopback detection at the subscriber side.
Supports learning up to 1024 MAC addresses.
Supports global configuration of enabling / disabling the MAC address learning
function.
Supports remote configuration of the MAC address aging time. The value ranges
between 0s and 300s. The default value is 80s.
Multicast
Supports the IGMP Snooping protocol.
Supports IGMP v1/v2/v3.
Supports filtering and forwarding of multicast MAC addresses.
Supports controllable multicast and uncontrollable multicast.
Supports fast leave.
Supports translation, transparent transmission and stripping of the multicast VLAN
tags.
Supports VLAN translation for the uplink multicast protocol packets.
Supports filtering the downlink multicast packets.
Supports bearing downlink multicast service flow and IGMP signaling packets via
different GEM ports.
Supports configuration of the multicast GEM ports.
Supports authentication of the GEM ports.
Supports no less than 256 multicast groups.
Uses the IPoE/PPPoE mode for the multicast services.
12
Version: A
To Next Page
Loading...
Need help?
General
